Products
Home  /  Products  /  Sponge Iron Briquetting Machine
Sponge Iron Briquetting Machine

Sponge Iron Briquetting Machine

Capacity:12-65TPH

Materials:Powdery cast iron, aluminum, copper, magnesium, titanium and molybdenum, etc.

Application:It is suitable for high-temperature pelleting in such industries as refractory, metallurgy and coal.

Email: info@sinoftm.com Get Price Services Online
Overview

Sponge iron briquetting machine can press powdery cast iron, aluminum, copper, magnesium, titanium and molybdenum whose temperature is below 850℃ into lump materials with high density. Sponge iron briquette machine is suitable for high-temperature pelleting in such industries as refractory, metallurgy and coal. Sponge iron ball pressing machine is especially suitable for the hot-pressing of direct reduction iron and light calcined magnesia.

Sponge Iron Briquetting Machine

Performance Features of Sponge Iron Briquetting Machine

1. To ensure normal operation of the high-temperature sponge iron ball briquette, before the sponge iron materials go into the ball press machine, such feeder machine must be used whose sponge iron feeding amount can be adjusted.

2. The equipment in front of and behind the sponge iron ball press machine must realize chain program start and stop with this ball press machine.

3. After the normal begins normal operation, regularly check whether the connecting parts are fastened.

4. When dismantling and changing the bearing of the ball press machine, adjust the radial internal clearance of the bearings that must conform to the standard.

5. The lubricating points of the fixed bearing pedestal and the sliding bearing pedestal of the sponge iron ball press machine must be added oil on time and the chamber must be maintained 80% lubricating grease. When adding oil to the driving support, the oil must be able to be squeezed out from the shaft end of the pre-pressing device.

6. Clean the hydraulic oil pump and oil filter after one month. Clean the oil box after 3-6 months. The environment temperature of the hydraulic station in winter should be below 5℃.

Working Principle of Sponge Iron Briquette Machine

Sponge iron briquette machine has similar working principle with high pressure ball press machine. Through the pre-pressing device, the sponge iron materials are eliminated with gas and compressed and forced into the space between the two rollers that are rotating with the same speed and at the opposite direction inside the briquette machine, and then the sponge iron materials will be pelleted. With the continuous rotation of the pressing rollers of the sponge iron ball machine, the sponge iron balls will fall off under the surface tension and gravity.

Leave us a message to get sponge iron briquette machine price?

Technical Data of Sponge Iron Briquetting Machine

Model Roller diameter (mm) Nominal roller breadth (mm) Max. total pressure (t) Max. linear specific pressure (t/cm) Main motor power (kw) Production capacity (t/h) Weight
(t)
FTM650-200 650 200 240 12 90 12 23
FTM750-300 750 300 360 12 185 28 36
FTM1000-500 1000 400 480 12 315 45 58.5
FTM1200-800 1200 500 600 12 500 65 129

INQUIRY

Please enter your demand such as Raw material type, Capacity, Feeding material size, Final product size, etc. To become our quality clients will have access to a discount of countract!

Product:
Your Name:
Your E-mail:
Your Tel:
Need:
Totop